431242 *12/ pack *24/ case
409442 *6/ pack *12/ case
404852 *2/ case *4/ load
404822 *2/ load *4/ load
404832 *2/ load *3/ load
450262 *2/ load *3/ load
🔆
53
42
26
23
14
14
.81
.53
.42
.37
.46
.12
203
161
100
88
54
53
.68
.00
.00
.46
.73
.44
💧
43
31
23
17
12
14
.05
.05
.37
.32
.93
.07
162
117
88
65
48
53
.94
.53
.46
.58
.96
.25
🍅
34
25
19
15
11
14
.44
.77
.91
.34
.90
.02
130
97
75
58
45
53
.36
.55
.38
.08
.04
.07
🌱
System Maintenance
Prevents blocked drippers & build-up in hydroponics, coco and soil systems
Prevents the blockage of drippers, pipes, pumps and filters — Helps stop white deposits from forming in the nutrient solution, even when carbohydrates or sugary additives are used. These can block dripper systems (and pipes) and are time-consuming to remove
100% organic formulation that enables growers to grow ‘organically’ without the usual drawbacks —will NOT harm valuable organic additives such as resin/root enhancers, bloom boosters, enzymes, myco’s and beneficial bacteria. Chlorines and peroxides found in competing products will destroy these types of additives and render them useless
For cleaning walls, floors and general system hardware during post harvest clean-up
Each batch of FloraMax is manufactured by our in-house chemists and undergoes rigorous quality testing before bottling, ensuring consistent performance and reliable yields from each crop.
Dosage
Nutrient solutions: 1mL/L (4mL/Gal) from seed to harvest. For heavy buildup, use at 2mL/L (8ml/Gal).
Post harvest cleanup: 25ml/L (100ml/Gal). Spray floors and walls.
Available Sizes
250mL, 1L, 5L, 20L & 1,000L
Organic Additive — NEVER use in conjunction with chlorines or peroxides
Will System Maintenance Improve the Effective Working Life of Nutrient Batches?
Yes, provided, i) Light ingress and evaporation are minimized; ii) Shade or bury the reservoir to minimize nutrient temperature; iii) Avoid the use of sugary additives such as carbohydrates and molasses. With a super-stable nutrient such as Veg-1 and its associated additives, batches can be stored for several weeks or even months provided pH is set well below 6.5 on day 1. By keeping everything clean – reservoir, drippers, feedlines, pump and filters – System Maintenance will help ensure all plants are being watered properly.
How to Perform Post Harvest Cleanup?
Remove plants then partly fill reservoir with water. Add 2-4ml/L (8-15ml/Gal) Pythoff PLUS, ensure pH 5 – 6. Run pump hourly for 24-hours. Discard this solution then flush several times with fresh water. To wash floors and walls and remaining hardware, spray with 25ml/L (100ml/Gal) FloraMax System Maintenance. Scrub well then wait 30 minutes before rinsing clean with water.
